[Free] 2018(Mar) Dumps4cert Testinsides Juniper JN0-360 Dumps with VCE and PDF 11-20

Dumps4cert.com : Latest Dumps with PDF and VCE Files
2018 Mar Juniper Official New Released JN0-360
100% Free Download! 100% Pass Guaranteed!
http://www.Dumps4cert.com/JN0-360.html

Juniper Networks Certified Internet Specialist, – Service Provider (JNCIS-SP)

Question No: 11

Which two configuration elements are defined under an MSTP instance? (Choose two)

  1. revision-level

  2. bridge-priority

  3. mstp-level

  4. vlan

Answer: B,D

Explanation: The correct answer is B, D because revision-level is common for the all MSTI instances and it is configured one level up from MSTI instance section.

Reference:

http://www.juniper.net/techpubs/en_US/junos10.0/information-products/topic- collections/config-guide-mx-series-layer2/mstp-edit-protocols.html

Question No: 12

You have configured multiple IP-IP tunnels across your network to provide connectivity to remote sites. Which technique is used to help the IP endpoints in your network determine the optimal packet size to send across your tunnels?

  1. path MTU discovery

  2. fragmentation discovery

  3. end-to-end MTU discovery

  4. packet throughput discovery

Answer: A

Question No: 13

Which OSPF LSA type is sent from the ABR to describe an ASBR that is in an area to which it is connected?

  1. Type 7

  2. Type 5

  3. Type 4

  4. Type 3

Answer: C

Question No: 14

– Exhibit – user@R1gt; show interfaces {

ge-1/1/0 { unit 0 { family inet {

address 10.100.1.1/30;

}

family iso;

}

}

lo0 {

unit 0 { family inet {

address 10.100.10.1/32;

}

family iso {

address 49.1001.0010.0100.00;

}

}

}

}

protocols { isis {

level 1 disable; interface ge-1/1/0.0 { level 2 disable;

}

interface lo0.0;

}

}

user@R2gt; show interfaces {

ge-1/1/0 { unit 0 { family inet {

address 10.100.1.2/30;

}

family iso { mtu 1496;

}

}

}

lo0 { unit 0 {

family inet {

address 10.100.10.2/32;

}

family iso {

address 49.1002.0010.0200.00;

}

}

}

}

protocols { isis {

interface ge-1/1/0.0 { level 2 disable;

}

interface lo0.0;

}

}

– Exhibit –

Click the Exhibit button.

Referring to the exhibit, R1 and R2 are directly connected using interface ge-1/1/0. What is the reason the IS-IS adjacency fails?

  1. R2 has an MTU value of 1496 configured on ge-1/1/0.

  2. R2 and R1 have different area IDs.

  3. R1 is configured for Level 2, and R2 is configured for Level 1.

  4. R1 is configured for both Level 1 and Level 2 to be disabled.

Answer: B

Question No: 15

What are two valid actions that can be applied to a frame by a Layer 2 firewall filter? (Choose two)

  1. Log

  2. loss-priority

  3. sample

  4. count

Answer: B,D

Explanation: The correct answers are B, D. Reference:

You can specify the following filter actions:

* accept

* count counter-name

  • discard

  • dscp code-point (family inet only)

  • forwarding-class class-name

  • ipsec-sa ipsec-sa (family inet only)

  • load-balance group-name (family inet only)

* log (family inet and inet6 only)

* logical-system logical-system-name (family inet and inet6 only)

* loss-priority (high | medium-high | medium-low | low)

  • next term

  • next-hop-group group-name (family inet only)

  • policer policer-name

  • port-mirror (family bridge, ccc, inet, inet6, and vpls only)

  • prefix-action action-name (family inet only)

  • reject lt;message-typegt; (family inet and inet6 only)

  • routing-instance routing-instance-name (family inet and inet6 only)

* sample (family inet, inet6, and mpls only)

  • service-accounting (service filters and family inet or inet6 only)

  • service-filter-hit (service filters and family inet or inet6 only)

  • syslog (family inet and inet6 only)

  • three-color-policer policer-name

  • topology topology-name (family inet and inet6 only)

  • traffic-class code-point (family inet6) only

Question No: 16

Click the Exhibit button.

Dumps4Cert 2018 PDF and VCE

Referring to the exhibit, MED is being used in your BGP network. All other BGP configurations use the default settings.

Which statement is correct regarding traffic destined to the 151.213.0.0/16 prefix in AS 358?

  1. A traffic black hole will be created at Router A and Router B.

  2. Traffic will load-balance across both the A-to-C and B-to-D paths.

  3. Traffic will prefer the A-to-C path.

  4. Traffic will prefer the B-to-D path.

Answer: C

Question No: 17

In an RSTP network, which combination of port types can exist on the root bridge?

  1. There can be some combination of designated ports and backup ports

  2. There can be some combination of root ports and alternate ports

  3. All ports will be designated ports

  4. All ports will be root ports

Answer: C

Question No: 18

What are two differences between RSTP and VSTP? (Choose two.)

  1. Using VSTP, the BPDU destination address is always 01:00:0C:CC:CC:CD.

  2. Using VSTP, the BPDU frame carries an 802.1Q tag.

  3. Using RSTP, the BPDU destination address is always 01:00:0C:CC:CC:CD.

  4. Using RSTP, the BPDU frame carries an 802.1Q tag.

Answer: A,B

Question No: 19

Which two statements describe differences between IPv4 and IPv6? (Choose two)

  1. IPsec is built into IPv6

  2. IPv6 uses a 32-bit (4-byte) address and can support up to 4,294,967,296 addresses

  3. IPv4 supports extension headers whereas IPv6 options are integrated into the base

  4. IPv6 eliminates the need for NAT

Answer: A,D

Question No: 20

– Exhibit –

user@R1gt; show route protocol bgp

inet.0: 6 destinations, 6 routes (6 active, 0 holddown, 0 hidden)

= Active Route, – = Last Active, * = Both

200.200.0.0/24 *[BGP/170] 00:00:47, localpref 100

AS path: 65001 I

gt; to 192.168.100.1 via ge-1/1/5.435 200.200.1.0/24 *[BGP/170] 00:00:47, localpref 100

AS path: 65001 I

gt; to 192.168.100.1 via ge-1/1/5.435 200.200.2.0/24 *[BGP/170] 00:00:47, localpref 100

AS path: 65001 I

gt; to 192.168.100.1 via ge-1/1/5.435 200.200.3.0/24 *[BGP/170] 00:00:47, localpref 100

AS path: 65001 I

gt; to 192.168.100.1 via ge-1/1/5.435

user@R2gt; show route 200.200/16

inet.0: 36 destinations, 36 routes (36 active, 0 holddown, 0 hidden) Restart Complete

= Active Route, – = Last Active, * = Both

200.200.0.0/24 *[Static/5] 00:09:12

Reject

200.200.1.0/24 *[Static/5] 00:09:12

Reject

200.200.2.0/24 *[Static/5] 00:09:12

Reject

200.200.3.0/24 *[Static/5] 00:09:12

Reject

200.200.4.0/24 *[Static/5] 00:09:12

Reject

user@R2gt; show configuration protocols bgp export export-200;

group c5 {

neighbor 192.168.100.2 { export export-200.200; peer-as 65002;

}

}

user@R2gt; show configuration policy-options policy-statement export-200.200 term 1 {

from {

route-filter 200.200.0.0/22 longer;

}

then accept;

}

user@R2gt; show configuration policy-options policy-statement export-200 term 1 {

from {

route-filter 200.200.0.0/21 longer;

}

then accept;

}

– Exhibit –

Click the Exhibit button.

R2 is exporting static routes to R1 using BGP. R1 is not receiving one of the five static

routes that is configured on R2.

Referring to the exhibit, what should be changed under the BGP configuration to resolve this issue?

  1. Delete the global export policy.

  2. Delete the neighbor export policy.

  3. Move policy export-200 to the group level.

  4. Move policy export-200.200 to the group level.

Answer: B

100% Dumps4cert Free Download!
Download Free Demo:JN0-360 Demo PDF
100% Dumps4cert Free Guaranteed!
JN0-360 Dumps

Dumps4cert ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.