Download New Updated (Spring 2015) Microsoft 74-697 Actual Tests 11-20

Ensurepass

 

QUESTION 11

You work for are an OEM system builder. A customer assembles a computer and plans to purchase an OEM DVD of Windows 8 to install on the computer. The customer plans to downgrade to Windows 7, and then to resell the computer at a later date. What should you tell the customer?

 

A.

The customer can purchase the OEM DVD of Windows 8, but must install Windows 8. The customer can then transfer the software and the license to someone else.

B.

The customer can purchase the OEM DVD of Windows 8, and then install Windows 7 Professional.

C.

Only an OEM system builder can preinstall Windows 8 OEM on hardware supplied by the OEM system builder.

D.

The customer can purchase the OEM DVD of Windows 8, but must install Windows 8. The customer cannot transfer the software or the license to anyone else.

 

Correct Answer: A

Explanation:

OEM downgrade rights apply to only Windows 8 Pro and allow for downgrades for up to two earlier versions (to Windows 7 Professional and to Windows Vista Business).

 

 

QUESTION 12

You plan to capture a Windows 8 reference installation. The reference installation contains several third-party drivers for USB devices. You need to ensure that the third-party device drivers are preserved in the captured Windows image. Which component should you configure in the answer file?

 

A.

Microsoft-Windows-PnpCustomizationsNonWinPE

B.

Microsoft-Windows-Setup

C.

Microsoft-Windows-Deployment

D.

Microsoft-Windows-PnpSysprep

 

Correct Answer: A

Explanation:

The Microsoft-Windows-PnpCustomizationsNonWinPE component is used to add one or more out-of-box drivers to a Windows installation. Drivers that are located in the path specified by DriverPaths are copied to the driver store of the Windows installation during the auditSystem configuration pass. When the system runs Plug and Play, these out-of-box drivers are available to install hardware on the computer.

 

Incorrect:

Not D: The Microsoft-Windows-PnpSysprep component specifies whether all Plug and Play information persists during the generalize pass. Typically, during the generalize pass, all device information is removed from the computer.

If the device information is removed during the generalize pass, the next time the computer runs Plug and Play, the devices will be re-initialized. Typically, the next time the computer boots, the specialize pass runs, and Plug and Play runs.

 

 

 

 

QUESTION 13

You have a Windows 8 image. You plan to deploy the image to several client computers. The client computers will be delivered to several different customers. You plan to provide all of the customers with the ability to perform a push-button reset of their computers from recovery media. The push-button reset will include a script that will repartition the hard disk drives automatically. You need to identify which encoding format must be used for the script file. Which encoding format should you identify?

 

A.

Unicode

B.

BigEndianUnicode

C.

ANSI

D.

UTF-8

 

Correct Answer: D

Explanation:

Using ResetConfig.xml

If you use a text editor to author your .xml files, you must save the document with an .xml file name extension, and use UTF-8 encoding. You must not use ANSI coding.

 

This is a code example for the ResetConfig.xml file.

 

<?xml version=”1.0″ encoding=”utf-8″?>

<!– ResetConfig.xml –>

<Reset>

<Run Phase=”BasicReset_BeforeImageApply”>

<Path>SaveLogFiles.cmd</Path>

<Duration>4</Duration>

</Run>

<Run Phase=”BasicReset_AfterImageApply”>

<Path>RetrieveLogFiles.cmd</Path>

<Param>/allApps</Param>

<Duration>2</Duration>

</Run>

<Run Phase=”FactoryReset_AfterDiskFormat”>

<Path>CheckPartitions.exe</Path>

<Duration>2</Duration>

</Run>

<Run Phase=”FactoryReset_AfterImageApply”>

<Path>InstallApps.cmd</Path>

<Param>/allApps</Param>

<Duration>2</Duration>

</Run>

<SystemDisk>

<DiskpartScriptPath>ResetPartitions-UEFI.txt</DiskpartScriptPath>

Etc.

 

 

 

 

 

 

 

 

 

 

QUESTION 14

DRAG DROP

You have a Windows Assessment and Deployment Kit (Windows ADK) environment that contains a file server named Served. Served runs Windows Server 2012.

 

You copy the Windows 8 installation media to a shared folder on Served. You install Windows 8 on a reference computer, and then you generalize the installation.

 

You need to replace the image in the share with an image of the reference computer.

 

Which three actions should you perform in sequence?

 

To answer, move the appropriate three actions from the list of actions to the answer area and arrange them in the correct order.

 

clip_image002

 

Correct Answer:

clip_image004

QUESTION 15

You have a reference computer named Computer1 that runs Windows 7. You plan to run sysprep.exe several times on Computer1. You need to prevent the Windows Product Activation clock from being reset on Computer1. What should you do?

 

A.

Set the SkipRearm option in Unattend.xml to 0.

B.

Set the ProductKey option in Sysprep.inf to 00000-00000-00000-00000-00000.

C.

Set the SkipRearm option in Unattend.xml to 1.

D.

Set the ProductKey option in Sysprep.inf to XXXXX-XXXXX-XXXXX-XXXXX-XXXXX.

 

Correct Answer: C

Explanation:

SkipRearm specifies whether to run the Windows Software Licensing Rearm program.

Rearming a computer restores the Windows operating system to the original licensing state. All licensing and registry data related to activation are either removed or reset. Any grace period timers are reset as well.

 

Values

1 Specifies that the computer is not rearmed and the computer will not be restored to its original, out-of-box state. All activation-related licensing and registry data will remain and will not be reset. Similarly, any grace period timers is not reset.

 

 

QUESTION 16

You are an OEM system builder. A customer purchases an OEM System Builder pack for Windows 8 Pro to install under a Personal Use License. Who is responsible for providing support to the customer under a Personal Use License?

 

A.

a Microsoft Authorized Distributor

B.

the customer

C.

Microsoft

D.

the OEM system builder

 

Correct Answer: D

Explanation:

The Personal Use license is for individuals who are building (and supporting) their own PCs.

 

 

QUESTION 17

You plan to deliver 20 client computers to a customer. The computers will have Windows 8 installed.

 

The customer identifies the following tasks that must be performed by the users of the computers:

 

clip_image006Create new Microsoft Word documents.

clip_image006[1]Create new Microsoft Excel documents.

clip_image006[2]Create new Microsoft Access databases.

clip_image006[3]Modify existing Microsoft PowerPoint presentations.

 

You plan to preinstall Microsoft Office 2010 on the computers.

 

You need to recommend an Office 2010 edition and license solution for the customer. The solution must minimize licensing costs.

 

What should you recommend?

 

A.

Office 2010 Professional and Microsoft Volume Licensing

B.

Office 2010 Home and Business and Full Packaged Product (FPP)

C.

Office 2010 Home and Business and a Product Key Card (PKC)

D.

Office 2010 Professional and Full Packaged Product (FPP)

E.

Office 2010 Professional and Product Key Card (PKC)

 

Correct Answer: E

Explanation:

Need Professional edition to get Access.

 

* A Product Key card is another way to purchase Microsoft Office 2010 with a new PC. It includes a Product Key designed to activate Office software on one preloaded PC.

/ Product Key Card details:

Includes a 25-character Product Key only* (no disc) Licensed for one installation on one PC only

License cannot be transferred to another PC

Backup disc available

/Why the Product Key Card?

Great value for one license only

Quick and easy to install, no discs needed

Eco-friendly

 

Incorrect:

Not A: Volume licensing for more licenses.

Not D: Best for customers needing fewer than five licenses.

 

 

QUESTION 18

DRAG DROP

Your network contains an Active Directory domain named contoso.com and a DHCP server named DHCP1.

 

You have a technician computer that has the Windows Assessment and Deployment Kit (Windows ADK) installed.

 

You prepare a reference computer named Computer1.

 

You install Windows Deployment Services (WDS) on a server named Server1.

 

You need to capture an image of Computer1 and store the image on Server1.

 

Which three actions should you perform in sequence?

 

To answer, move the appropriate three actions from the list of actions to the answer area and arrange them in the correct order.

 

clip_image008

 

Correct Answer:

Free VCE & PDF File for Microsoft 74-697 Real Exam

Instant Access to Free VCE Files: MCSE|MCSA|MCITP…
Instant Access to Free PDF Files: MCSE|MCSA|MCITP…

 

 

QUESTION 19

You capture a reference image of a Windows 8 installation to a file named Custom.wim. You build a new client computer and start the computer from Windows Preinstallation Environment (Windows PE). You need to deploy the image contained in Custom.wim to the new computer by using Windows PE. What should you do first?

 

A.

Run setup.exe from the Windows 8 installation media.

B.

Create a hard disk partition.

C.

Create an answer file.

D.

Mount the Custom.wim file.

 

Correct Answer: B

Explanation:

First you need a partition.

Reference:

Walkthrough: Deploy a Windows RE Image on Hard Drive

 

 

QUESTION 20

You work for an OEM system builder. You plan to sell a client computer. The computer has Windows 8 preinstalled in a dual boot configuration by using OEM versions of Windows 8. You need to identify the license or licenses required for the computer. What should you identify?

 

A.

One OEM System Builder Windows desktop operating system license

B.

Two Full Packaged Product (FPP) licenses

C.

One Full Packaged Product (FPP) license and one OEM System Builder Windows desktop operating system license

D.

Two OEM System Builder Windows desktop operating system licenses

E.

One Full Packaged Product (FPP) license

 

Correct Answer: D

Explanation:

A customer who wants Microsoft Windows installed onto two partitions of a computer system will need to obtain two OEM system builder Windows software licenses.